<
>
Suction cup with hook (2psc set)
CODE
GS-3605C
COLOUR
SIZE
MATERIAL
MAXIMUM LOAD
COMPONENTS
Silver
55(W) X 40(D) X 90(H)mm
ABS Plastic, Polyurethane, NBR rubber
2kg
2 X suction cup
2 X hook
If you like this, you might be into these
Installation Guide
Attach the product to bigger surfaces than the suction cup itself, e.g.: tiles, coated appliances, coated furnitures, wall painted with oil-based paint, mirrors, windows, etc.
The suction cup can be used on slightly uneven surfaces up to 1 mm.
Precautions
The suction cup can not be used on porous surfaces such as cement wall, wallpaper, patterned tiles.
Do not place valuable or fragile items on the product.
Before relocating the product, wash off the polyurethane gel with soap and running water to restore the long-lasting hold.
It is recommended to readjust the cap once a month to make it last longer.
HOW TO INSTALL
sTEP 1
Wipe dust and moisture off the surface with a dry towel.
sTEP 2
Remove the protective film from the suction plate.
step 3
Find a suitable place for the product.
Push it against the wall to attach it temporarily.
step 4
Get the frame off the suction cups.
Twist the screw to the left to loosen it.
sTEP 5
Push the center of the screw hard
in order to get rid of any air in the suction cups.
sTEP 6
Push the suction cup around the screw against the wall once more.
step 7
Lock the cap by twisting it to the right as much as possible, while pushing the frame against the wall.
step 8
Attach the clips from the top to the bottom at right angle to the designated holes on the frame. (Do not place fragile or valuable items on the hanger and basket.)
Correct installation
Just hang the clip on the suction plate.
Incorrect installation
Do not insert the clip between the suction plate and the cap.
<
>
CandL l C&L INT GmbH
Gewerbepark Brand 82, 52078 Aachen, Germany
Tel: +49 (0) 241 510023 30
CONTACT >
